Order an Archwire with a Staged Prescription
The SureSmile software allows you to order a wire that has a percentage of the full expression in its design, such as a 50% staged wire. Here are several reasons that you might need staged wires:
- You anticipate difficulty in wire insertion due to the severity of the malocclusion.
- A tooth or teeth are periodontally involved.
- Root resorption has occurred.
- The patient has a low tolerance for discomfort.
You can also order a wire that has passive segments (that is, 0% staged). Here are several reasons that you might need a wire with passive segments:
- You need stabilization archwires to maintain a group of teeth (for example,, to keep them periodontally involved).
- You need to maintain the alignment of the teeth segment/group.
- You need to increase anchorage.
Note: When ordering staged wires, do not forget to submit the order for the 100% full expression wire at the same time.
To order an archwire with a staged prescription
- From the New drop-down menu, select Wire.
Result: The wire prescription appears.
- Click to open the Wire tab.
- Select the upper or lower arch option.
- Select the wire material and cross-section.
- Go to the Limits [%] row at the bottom of the table, and change the value from the default 100% for the tooth or teeth that you want to stage.
- Click anywhere on the blue screen to apply.
- Repeat steps 3-5 on the opposite arch as needed.