Design and Order IDB Trays (Treatment Simulation)
To create labial (3-point contact, typically used for a labial approach)
IDB trays based on a treatment simulation, access the IDB tools as follows:
Start a new treatment simulation. Align teeth using the setup
workflow tool. See Using the Setup Workflow
Tool to Create a Simulation. We recommend this because placing
brackets in a Treatment Simulations is best done by using the bracket
plane on aligned teeth.
- Click the Brackets
tab. Click the Apply
Brackets Set button and click the Assign
Brackets Set... option. The Brackets Set Selection dialog
box opens. Select a bracket set from the list. The list is automatically
filtered to list only bracket sets supported by SureSmile for use
with IDB bonding trays. SureSmile
default bracket sets approved for IDB use have "For IDB"
in their description. Ormco IDB approved bracket sets have just
"IDB " in their description.
Tip:
To quickly determine if a bracket is IDB approved, hover your mouse
over the bracket in the tooth chart to display a pop-up box with details
about the bracket.
- (Optional) Click the Assign Bracket button on the Brackets/Attachments
tab and to replace single brackets in a bracket set as necessary.
Brackets approved for IDB use are indicated in the bracket list on
the Bracket Selection dialog box. Make sure you only select IDB approved
brackets. Otherwise you will not be able to generate the IDB trays.
- (Optional) Use the tools on the Bracket Placement tab to adjust
the position of the brackets and use the Bracket Plane and Align Brackets
tools to align the brackets with the bracket plane. See Using
the Bracket Placement Tab .
- (Optional) Identify and reduce bracket voids. Identify those brackets
where additional adhesive will be needed to fill voids between the
bracket base and the tooth surface, and make adjustments to the bracket
positions to reduce the voids if desired. See Identifying
Bracket Voids for more information.
- Click the Brackets
tab. Click the Tray Tools
menu in the menu bar. Use the icons to generate trays/segments
as needed.
- Click the Order
Trays button or the Export Trays button
on the Order tab. A confirmation
message appears.
- Click OK to
complete the order. SureSmile puts the IDB tray simulation into an
(Ordered) state and it becomes read only. The Order Trays button is
now disabled. To reorder trays, click the Copy
button under Straight Wire Simulation and reorder the trays.
Note: The Order Trays button
remains available after you submit your order so you can reorder the
trays in case of breakage or loss.
FYI:
What's the difference between Order Trays
and Export
Trays?
Clicking Order Trays sends
the digital files to Dentsply Sirona for processing and printing.
One set of printed IDB trays is shipped to your practice. (A separate
fee applies to each arch.)
Clicking Export Trays downloads
the IDB tray digital files locally so you can print your own IDB
trays in-house or at a local lab. (One-time charge per arch.)